Industrial Boiler Waste Gas Desulfurization Stainless Steel Centrifugal Blower
Introduction
Industrial Boiler Waste Gas Desulfurization Stainless Steel Centrifugal Blower is suitable for conveying air and non-corrosive, unnatural and non-viscous gases.
The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3.
The fan can also be used in cement kiln decomposition process, steel smelting and other special occasions use of high temperature fan (use heat resistant & high strength material).
Centrifugal fan is applied in industrial boiler, (centrifugal fan can be applied in industrial boiler,) it also can be applied in industrial kilns, blast furnace, Industrial waste heat recovery device, Electrolytic aluminium production line air purification system and other industrial work environment.
According to fan parameters you need, SIMO can make centrifugal blower fan technical solution for you. So please provide air capacity, pressure range, medium temperature, voltage and other requirements, more details will help us design suitable technical solution for you.
Technical data
| series | model | Centrifugal Blower Rotation Speed
(r/min) | Centrifugal Blower Total Pressure
(Pa) | Centrifugal Blower Air Capacity
(m³/h) | Power
(kW) |
| 9-10 Centrifugal Blower | 4A | 2900 | 3253～3597 | 824～1704 | 2.2～3 |
| 4.5A | 2900 | 4112～4603 | 1174～2504 | 4～5.5 |
| 5A | 2900 | 5080～5697 | 1610～3488 | 7.5～11 |
| 5.6A | 2900 | 6400～7182 | 2262～4901 | 11～15 |
| 6.3A | 2900 | 8148～9149 | 3220～6978 | 18.5～30 |
| 7.1A | 2900 | 10426～11717 | 4610～9988 | 37～55 |
Advantages and Features
1.The Industrial Boiler Waste Gas Desulfurization Stainless Steel Centrifugal Blower can output higher gas pressure, and can provide more gas flow at the same time, low noise.
2. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians.
3. The motor shaft is elastically connected with the drive shaft. It is not necessary to tighten the belt or replace the belt frequently, and the maintenance workload is small.
4. The fan system running at normal temperature with an impeller diameter of less than 1400 mm does not require additional configuration of bearing cooling device, which reduces the user's investment and maintenance workload.
5. When the airflow resistance is increased, the motor load will be automatically reduced and the motor will not be burnt.
6.The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
7. Running test and vibration value detection after the production is completed, the fan operation is reliable.
FAQ
1. What parameters need to be provided when you design the industrial centrifugal fans?
Answers: Air flow, total pressure or static pressure, inlet temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales service?
Answers: Before our cooperation, we have the professional technical team to help you make the technical solution according to your working condition, to make sure the centrifugal fan efficiency operation.
After sales service, we will offer 12 months’ repairing service, and provide lifelong follow-up services. Besides, our engineers are available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, BV certifications and so on.
Product Tags:
|
|
Industrial Centrifugal Blower Boiler Waste Gas Desulfurization Stainless Steel Images
|
